List of Board Changes

Here is a list of changes made to the boards received from Sierra Circuits.

Board 1

• Individual channel 14 was missing C2. We placed the component on ourselves.

Board 2

• Individual channel 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi.

Board 3

• Individual channels 11 and 15 had 2 RBi's instead of an RBi and a CBi. We replaced the wrong RBi with the correct CBi.
• The 100k resistor in the voltage reference was actually a 442k resistor.
• The voltage regulator for AMPREF had the wrong pin out in our drawings. We rotated it so that VCC_VRef moved to where AMPREF was and a wire attaches from AMPREF to where VCC_VRef was.