BW July 2018
Jump to navigation
Jump to search
7/13: Yesterday I did some practice fuses and then fused four productions fibers in bundle 404 using a piece of sponge gasket to keep the clamps from bottoming out. The work was slow because it took me a long time to remove wings.
Today Jim said Andrew was getting very good results from fusing. He suggested that Andrew should take over as primary fusing technician. That may be a good idea since Andrew seems to be quicker at removing wings.
While Andrew was learning to fuse scrap fibers with the sponge gasket, I cut more short fibers. Later I cleaned a bundle of shorts scraps and started polishing a new one.