Difference between revisions of "Temperature Data from Fiber Heating"
Jump to navigation
Jump to search
| Line 117: | Line 117: | ||
The current LabVIEW program sometimes records a zero or #NV in the temperature data file. We should change the program to so that it replaces a zero or NaN with the previous temperature. If a second zero or NaN occurs immediately after the first, LabVIEW should not replace the second one with another value. | The current LabVIEW program sometimes records a zero or #NV in the temperature data file. We should change the program to so that it replaces a zero or NaN with the previous temperature. If a second zero or NaN occurs immediately after the first, LabVIEW should not replace the second one with another value. | ||
| − | [ | + | [https://drive.google.com/open?id=0B4wCyytpeOAgfk5UQnZzSkFIUUVRQXIyNmVKYWhJR3hRa2l6bi1yZjhEQzhKVTJpZzcxM3M LabVIEW Resources] |
Revision as of 21:44, 25 August 2015
Data Files
We will make available raw spreadsheet data files and edited files that include charts and summary information.
Data From Three Thermistors
March 27, 2015
March 30, 2015
April 24, 2015
Calibration Graphs for Four Thermistors
The adjusted variables for the thermistor temperature formula are shown below each calibration graph.
Back Center
Front Left End
Middle Right End
Bottom Center
All Temperature Data from Calibration Tests
These graphs display temperature data from all thermistors during the calibration runs.
Other Tests
Next Steps
The current LabVIEW program sometimes records a zero or #NV in the temperature data file. We should change the program to so that it replaces a zero or NaN with the previous temperature. If a second zero or NaN occurs immediately after the first, LabVIEW should not replace the second one with another value.