Difference between revisions of "Mylar Stretching for Diamond Mounting"

From UConn PAN
Jump to navigation Jump to search
(Created page with 'UNDER CONSTRUCTION The '''Tagger Microscope''' is a movable, high-resolution [http://en.wikipedia.org/wiki/Hodoscope hodoscope] that counts post-bremsstrahlung electrons corre…')
 
Line 1: Line 1:
 
UNDER CONSTRUCTION
 
UNDER CONSTRUCTION
  
 +
The GlueX experiment requires a diamond radiator to produce a photon beam... . UCONN has recently acquired four diamond samples from [http://www.sinmat.com/ Sinmat] and [website ???9]. 
  
 +
In May of 2011 the diamonds are being brought to Cornell University for testing at [http://www.chess.cornell.edu/ CHESS]
  
−
The '''Tagger Microscope''' is a movable, high-resolution [http://en.wikipedia.org/wiki/Hodoscope hodoscope] that counts post-bremsstrahlung electrons corresponding to the photon energy band of interest to the [http://www.gluex.org/ GlueX] experiment in [http://www.jlab.org/Hall-D/ Hall D] in [http://www.jlab.org Jefferson Lab]. While designed as a general-use device, it has been optimized primarily for use in the GlueX experiment, covering the E<sub>&gamma;</sub> range of 8.4 - 9&nbsp;GeV (E<sub>e</sub> 3 - 3.6&nbsp;GeV).
+
==?==
−
 
 
−
On October 19, 2010 construction of the Tagger Microscope prototype was completed with delivery to Jefferson Lab the following day. Further research and development based on the findings during the final leg of construction and preliminary testing at Jefferson Lab is still in progress. Additionally, new mass-production techniques necessary for the construction of the full scale microscope are also being explored. Below is a brief overview of the final leg of construction just prior to delivery.
 
−
 
 
−
==Construction: the final effort==
 
 
* [http://zeus.phys.uconn.edu/~mcintyre/workfiles/Fall-2010/Heat-Treating/Heat-Treating.html '''Heat Treating Fibers''']
 
* [http://zeus.phys.uconn.edu/~mcintyre/workfiles/Fall-2010/Heat-Treating/Heat-Treating.html '''Heat Treating Fibers''']
  
−
* [http://zeus.phys.uconn.edu/~mcintyre/workfiles/Fall-2010/Fiber-Gluing/Fiber-Gluing.html '''Fiber Gluing''']
+
==??==
−
 
 
−
* [http://zeus.phys.uconn.edu/~mcintyre/workfiles/Fall-2010/Fiber-Painting/Fiber-Painting.html '''Fiber Painting''']
 
−
 
 
−
* [http://zeus.phys.uconn.edu/~mcintyre/workfiles/Fall-2010/Bundle-Gluing/Bundle-Gluing.html '''Bundle Gluing''']
 
−
 
 
−
* [http://zeus.phys.uconn.edu/~mcintyre/workfiles/Fall-2010/Final-Product/Final-Product.html '''Final Product''']
 
−
 
 
−
==Lessons Learned==
 
  
 
* [http://zeus.phys.uconn.edu/~mcintyre/workfiles/Fall-2010/Lessons-Learned/Lessons-Learned.html '''Problems & Solutions''']
 
* [http://zeus.phys.uconn.edu/~mcintyre/workfiles/Fall-2010/Lessons-Learned/Lessons-Learned.html '''Problems & Solutions''']
  
−
==Reports==
+
==???==

Revision as of 21:51, 6 April 2011

UNDER CONSTRUCTION

The GlueX experiment requires a diamond radiator to produce a photon beam... . UCONN has recently acquired four diamond samples from Sinmat and [website ???9].

In May of 2011 the diamonds are being brought to Cornell University for testing at CHESS

?

??

???

Retrieved from "https://zeus.phys.uconn.edu/wiki/index.php?title=Mylar_Stretching_for_Diamond_Mounting&oldid=5359"