Difference between revisions of "SiPM digital control board power supplies"
Jump to navigation
Jump to search
(→+5V supply: added suggested AD5535 power connections) |
(→+210V supply: justified 210V supply) |
||
| Line 4: | Line 4: | ||
Use for: | Use for: | ||
*AD5535 DAC | *AD5535 DAC | ||
| − | **VPP high voltage supply | + | **VPP high voltage supply |
| + | ***Using this high voltage will allow for large adjustments of the SiPM amplifier bias voltages. Large variations may be necessary because the MATLAB model showed that adjustments between 0 and +50V had no effect on the SiPM. | ||
=== +5V supply === | === +5V supply === | ||
Revision as of 17:48, 25 June 2008
As seen in the SiPM digital control board netlist, the ICs on the control board have many different power requirements. This page suggests some compatible voltage supplies that will be necessary on the board. To reduce the number of backplane connections and the number of external supplies needed, some of these supplies might be created using voltage dividers on the control board.
+210V supply
Use for:
- AD5535 DAC
- VPP high voltage supply
- Using this high voltage will allow for large adjustments of the SiPM amplifier bias voltages. Large variations may be necessary because the MATLAB model showed that adjustments between 0 and +50V had no effect on the SiPM.
- VPP high voltage supply
+5V supply
Use for:
- AD5535 DAC
- V+ amplifier supply pins
- AVCC analog supply pins
- DVCC digital supply pins
- AD7314 temperature sensor
- VDD supply
- indicates ±1°C accuracy
- VDD supply
- AD7928 ADC
- AVDD pins
- indicates measuring range of 0 to 2xREF_IN voltage
- AVDD pins
-5V supply
Use for:
- AD5535 DAC
- V- amplifier supply pins