Difference between revisions of "SiPM digital control board power supplies"
Jump to navigation
Jump to search
(→+5V supply: added connections) |
|||
| Line 2: | Line 2: | ||
=== +5V supply === | === +5V supply === | ||
| + | Use for: | ||
| + | *AD5535 DAC | ||
| + | **V+ amplifier supply pins | ||
| + | **AV<sub>CC</sub> analog supply pins | ||
| + | **DV<sub>CC</sub> digital supply pins | ||
| + | *AD7314 temperature sensor | ||
| + | **V<sub>DD</sub> | ||
| + | *AD7928 ADC | ||
| + | **AV<sub>DD pins</sub> | ||
| + | ***indicates measuring range of 0 to 2xREF_IN voltage | ||
=== +3.3V supply === | === +3.3V supply === | ||
=== +2.5V supply === | === +2.5V supply === | ||
Revision as of 16:18, 25 June 2008
As seen in the SiPM digital control board netlist, the ICs on the control board have many different power requirements. This page suggests some compatible voltage supplies that will be necessary on the board. To reduce the number of backplane connections and the number of external supplies needed, some of these supplies might be created using voltage dividers on the control board.
+5V supply
Use for:
- AD5535 DAC
- V+ amplifier supply pins
- AVCC analog supply pins
- DVCC digital supply pins
- AD7314 temperature sensor
- VDD
- AD7928 ADC
- AVDD pins
- indicates measuring range of 0 to 2xREF_IN voltage
- AVDD pins